T-Pins 2.5mm x 28mm Pack of 100

Availability: Out of stock

$6.56

Quick Overview

A T-pin is a two-pronged pin with a T-shaped head used to connect the joint discs in your bear. Size 2.5 x 28mm. Quantity: Pack of 100. Sufficient for 20 bears that are 5-way jointed.

T-Pins 2.5mm x 28mm Pack of 100

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

A T-pin is a two-pronged pin with a T-shaped head. The T-pin’s flat head prevents it from being pulled through the hole of disc. The two prongs are referred to as tines (or tails). In bearmaking they are used as a connector inside the fabric and between discs for mobility and to secure the bear’s limbs and/or head to its body. After passing the T- pin through the discs from inside the limbs and/or head to inside the body, the prongs, or tails, are separated or splayed apart, (using either long nose pliers or a cotter pin turner), and then each prong or tail is independently rolled down into a tight curl so that it touches the disc and provides a secure fit to the limb or head/body connection. They are also a preferred choice for use in miniature/smaller bears where it would be difficult to use another option such as the slot-head screw/locknut connection. Size 2.5 x 28mm. Pack of 100. Sufficient for 20 bears that are 5-way jointed.